$69 USD
| Interior Size: | 8.0x8.0x1.1" |
| Fluid Volume: |
23oz / 680ml |
| Wall Thickness: | 1/2" |
| Material: | Platinum Cure Silicone - Shore 30A |
| Interior Finish: | Polished / Shiny |
Our most popular tray router template is now a silicone mold! Dog lovers are a different breed (no pun intended) and love dog and K9 themed functional art. This mold will empower you to create an 8" wide, 1.1" deep dog paw dish with five sections. Perfect for snacks, candy, jeweler or even dog treats!
We also include an acrylic template (stencil) of the large bottom paw pad so you can cut out a photo, insert it into the pad part of your piece, then backfill it with resin to seal it inside. This template allows to to create a beautiful fun (or memorial) solid resin serving bowl featuring an actual picture of your pooch. Watch the video below for a full demonstration on how this works.
Our RSCC line of silicone molds are crafted with artists, makers and bakers in mind. While RSCC stands for resin, soap, candy and chocolate they can also be used with plaster, acrylic resin/Jesonite, concrete and other popular pourable materials.
These are not your run of the mill $10 mass produced and imported molds you'll find on many shopping sites. The custom tooling (blanks) and silicone molds are all made one-by-one, by hand at our facility in Ontario, Canada. We use the highest grade platinum cure silicone, which surpasses the quality and standards of regular food grade silicone. Our silicone is cured with platinum, not peroxide making it safer for use in food and medical applications. We make our molds incredibly thick, to ensure they are self supporting and won't bend or deform when full of your material. Every artist, maker or baker who gets one of our molds immediately acknowledges the quality difference and can justify the cost difference.
Please remember that if you are using silicone molds with epoxy resin or other corrosive or abrasive chemical that you need to use a mold release before pouring your resin. We recommend a non-silicone based release such as the MG Chemicals 8329 or Mann Ease Release 200/300. Using a proper release will extend the life of your mold and help to prevent mold tear-out.
