$76 USD
| Interior Size: | 18x7.4x0.75" |
| Fluid Volume: | 25oz / 740 ml Background Layer, 2.5oz / 74ml Stars |
| Wall Thickness: | ~1/2" |
| Material: | Platinum Cure Silicone - Shore 30A |
| Interior Finish: | Polished / Shiny |
Create beautiful and iconic memorial folded American flags out of epoxy resin, Jesmonite, concrete or even chocolate using this "13 Folds Of Old Glory" silicone mold. This mold is designed to have the initial background layer filled, then demolded. Once demolded you can backfill 10 stars with resin.
The bottom surface of each of the stars is rough and not polished like the rest of the mold, so it is highly recommended that you backfill them for the best result.
Our RSCC line of silicone molds are crafted with artists, makers and bakers in mind. While RSCC stands for resin, soap, candy and chocolate they can also be used with plaster, acrylic resin/Jesonite, concrete and other popular pourable materials.
These are not your run of the mill $10 mass produced and imported molds you'll find on many shopping sites. The custom tooling (blanks) and silicone molds are all made one-by-one, by hand at our facility in Ontario, Canada. We use the highest grade platinum cure silicone, which surpasses the quality and standards of regular food grade silicone. Our silicone is cured with platinum, not peroxide making it safer for use in food and medical applications. We make our molds incredibly thick, to ensure they are self supporting and won't bend or deform when full of your material. Every artist, maker or baker who gets one of our molds immediately acknowledges the quality difference and can justify the cost difference.
Please remember that if you are using silicone molds with epoxy resin or other corrosive or abrasive chemical that you need to use a mold release before pouring your resin. We recommend a non-silicone based release such as the MG Chemicals 8329 or Mann Ease Release 200/300. Using a proper release will extend the life of your mold and help to prevent mold tear-out.
